Ionization And Oxidation

Standard Inground Pool System

The Standard Turbo System is designed for inground pools from 10,000 to 50,000 gallons. The user can select ionization or oxidation by through the use of a toggle switch. Initially the unit will be placed in the ionization mode. Once the copper ion level reaches 0.4-0.7ppm, the system should be switched to provide oxidation. Most pools will require the system to be in the ionize mode 6-12 hours one day per week to maintain the desired ion level. The remaining time, the unit should be in the oxidation mode to remove contaminants from the water. The system can adequately keep the pool water clean by running the pump only 6-12 hours per day.

The ECOsmarte Standard Turbo System electrical controller box

The ECOsmarte Standard Turbo System ionization and oxidation chamber

The Standard Turbo System consists of only two components, the electrical controller box and an ionization and oxidation chamber that fits in the return line to your pool from your filter.

The ECOsmarte Pool Manager test kit is included with every pool system. This test kit allows the pool owner to easily test the three vital water chemistry items required by the ECOsmarte system without having to travel to a pool store to have their water tested.

The system includes a test for calcium hardness, pH and copper. Everything fits neatly in a handy carrying case. Instructions for each test are shown in the cover of the hard case.

BACK

Test Your Water With ECOsmarte's Pool Manager

Totally Automated Pool System

The Totally Automated System does everything the Standard Turbo System does and more. The programmable controller comes with a programmable keypad. By following the prompts on the screen, the user can program the controller to provide ionization and oxidation for specific days of the week and times of the day. This eliminates
the need to manually change the system from ionization to oxidation and back again on a weekly basis.

The Totally Automated System also provides automated CO² injection to control the water pH. The flow rate is

The ECOsmarte Totally Automated System

demand for CO² pH control. The controller actuates the flow control solenoid valve to provide pH correction. Maintenance of the flow control unit is minimal. The time for CO² injection can be adjusted to minimize cost of tank refills.

By simply performing regular water testing twice per week during the first month after installation the user will be able to determine the amount of time needed for adequate CO² injection.

After the first few weeks of calibrating the copper timing and CO2 injection, the system runs in a totally automated manner eliminating the need for weekly testing of pH and copper.

The Totally Automated System is ideal for pool owners that want total automation or pool owners who would prefer to control rising pH using carbon dioxide rather than manually adding muriatic acid to their pool water.

The Totally Automated System is the most maintenance-free pool water treatment system available.

BACK

Test Your Water With ECOsmarte's Pool Manager

Above Ground Pool System

This system operates the same as the Standard Turbo In-Ground System except it is designed for smaller volume applications. It is intended to work with above-ground pools with less than 10,000 gallons of water. These systems come with the standard controller and a smaller 1.5” ionization/oxidation chamber.

Spa System


	The spa system is designed for spas, hot tubs and swimming lap pools of any size up to 5,000 gallons. Due to the small amount of water, the frequency and amount of ionization and oxidation is significantly less than other applications. The ECOsmarte Spa System is specifically engineered for treating small amounts of water.

BACK